TM 55-1520-240-23-6
7-173
DISASSEMBLE AND INSPECT ACCUMULATOR (HP1323100) (AVIM)
(Continued)
7-173
7.
Push piston (8) out of housing (1). Use rod (9).
7.1.
Measure inside diameter (9.1) of housing (1).
On accumulator HP1323100-1 (145HS656-1),
diameter shall not be more than 1.555 inches.
On accumulator HP1323100-2 (114HS656-2),
diameter shall not be more than 1.994 inches.
8.
If two plates (10) are damaged, remove plates.
Use heater gun. Record data on plate for
transfer.
9.
Remove four rings (11) and two packings (12)
from piston (8).
10.
Measure diameter of three lands (13) of
piston (8). On accumulator HP1323100-1
(145HS656-1), diameter shall not be less than
1.550 inches. On accumulator HP1323100-2
(145HS656-2), diameter shall not be less than
1.988 inches.
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-720
