TM 55-1520-240-23-6
7-148.2
REPLACE APU START ACCUMULATOR MOUNTING PLATE
7-148.2
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hydraulic Repairer’s Tool Kit, NSN 5180-00-323-4891
Container, 2 Quart
Materials:
Cloths (E120)
Gloves (E186)
Personnel Required:
Aircraft Pneudraulics Repairer
Inspector
Equipment Condition:
APU Start Accumulator Removed (Task 7-148)
General Safety Instructions:
Hydraulic fluid (E199) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
REMOVE PLATE
1.
Disconnect tube (1) from mounting plate (2).
Use container and cloths (E120) for spilled fluid.
Wear gloves (E186).
2.
Loosen nut (3) and disconnect tee (4) from
mounting plate (2). Use container and cloths
(E120) for spilled fluid. Wear gloves (E186).
7-662
