TM 55-1520-240-23-6
7-123
INSPECT PIVOTING AND SWIVELING SERVOCYLINDERS
(Continued)
7-123
7.
Check the following at the aft pivoting
servocylinder mounts:
NOTE
If no gap is present, the entire
hardware stackup should be
inspected prior to removal of the
servocylinder.
a.
At the forward mount, check for a positive gap
between outboard lug (21) and washer (22).
b.
At aft mount, check for a positive gap
between inboard lug (23) and washer (24).
NOTE
If no gap is present, the entire
hardware stackup should be
inspected prior to removal of the
servocylinder.
7.1.
At the aft swiveling servocylinder mount, check
for a positive gap between outboard lug (25) and
washer (26).
7-541
