TM 55-1520-240-23-6
7-107
REMOVE FLIGHT CONTROL RESERVOIR/ COOLER RELIEF VALVE
(Continued)
7-107
NOTE
Procedure is same to remove relief
valve from No. 1 or No. 2 flight control
reservoir/cooler. Removal of No. 2
relief valve is shown here.
1.
Loosen clamp (1) on hose (2). Disconnect hose
from tee (3). Use gloves (E186).
2.
Open valve (4) and drain reservoir/cooler (5).
Use container and cloths (E135) for spilled fluid.
3.
Close valve (4). Connect hose (2) to tee (3).
Tighten clamp (1).
4.
Remove lockwire from valve (4), switch (6), and
bulb (7).
5.
Remove valve (4), two packings (8), and retainers
(9). Use cloths (E135) for spilled fluid.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-505