TM 55-1520-240-23-6
7-35
REMOVE NO. 1 OR NO. 2 POWER CONTROL MODULE FILTER CHANGE
SWITCH
(Continued)
7-35
NOTE
There are four filter switches, two
in No. 1 and two in No. 2 module.
Procedure is same to remove any filter
switch. No. 1 module is shown here.
1.
Disconnect connector (1) from switch (2).
2.
Remove lockwire from four screws (3). Remove
four screws from switch (2).
3.
Remove switch (2) and two packings (4). Use
cloths to catch spilled fluid.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-189
