TM 55-1520-240-23-6
7-330
BLEED UTILITY HYDRAULIC WHEEL BRAKE SYSTEM
(Continued)
7-330
15.
Working at right aft landing gear, loosen bleed
fitting (17) of hose (16). Allow fluid to flow until
air free. Tighten fitting.
16.
Disconnect hose (16) from fitting (17) of cylinder.
17.
Remove hydraulic power.
18.
Working in cockpit, remove plug (11) from hose
(10). Use cloth (E120) for spilled fluid. Use
gloves (E186).
19.
Disconnect hose (10) from port (9) of cylinder (3).
20.
Install plug (8) in port (9).
21.
Disconnect PRESS hose (1) from port (6) of
cylinder (3).
22.
Remove plug (7) from RETURN hose (5).
23.
Connect hose (5) to RTN port (6) of cylinder (3).
Remove tag.
24.
Remove cap (4) from port (2).
25.
Connect hose (1) to PRESS port (2) of cylinder
(3). Remove tag.
26.
Repeat steps 1 thru 26 for pilot’s left brake
cylinder and left forward and aft wheel brake
cylinders.
7-1218
