TM 55-1520-240-23-6
7-330
BLEED UTILITY HYDRAULIC WHEEL BRAKE SYSTEM
(Continued)
7-330
10.
Working at right aft landing gear, connect bleed
hose (16) to bleed fitting (17) of wheel brake
cylinder (18).
11.
Apply hydraulic power. Set stand for 3 gpm at
200 psi.
12.
Loosen plug (11) in hose (10) from cylinder (3).
Allow fluid to flow until air free. Tighten plug.
13.
Working at right forward landing gear, loosen
bleed fittings (13) of two cylinders (14 and 15).
Allow fluid to flow until air free. Tighten fittings.
14.
Disconnect hoses (12) from two cylinders (14
and 15).
7-1217
