TM 55-1520-240-23-6
7-323
FLUSH POWER STEERING PRESSURE TUBING
(Continued)
7-323
42.
Working from ramp, disconnect hose (11) from
tube (12). Use container and cloths (E120) for
spilled fluid. Use gloves (E186).
43.
Disconnect hose (8) from tubes (9 and 10). Use
cloths (E120) for spilled fluid.
44.
Disconnect hose (5) from tubes (6 and 7). Use
cloths for spilled fluid.
45.
Remove plug (16) from tube (13).
46.
Connect tube (13) to INLET port (14) of pressure
reducer (15).
47.
Disconnect hose (4) from module (3). Use
container and cloths (E120) for spilled fluid.
48.
Connect tube (1) to BK STRG PRESS port (2)
of module (3).
INSPECT
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
Install power steering swivel/lock module (Task
7-292).
Perform operational check of power steering (TM
55-1520-240-T).
Close left and right aft landing gear access covers
(Task 2-2).
END OF TASK
7-1180