TM 55-1520-240-23-6
7-324
FLUSH POWER STEERING AND WHEEL BRAKE RETURN TUBING
(Continued)
7-324
Filter assembly kit
ADHT6814-M9716M must be
installed in test stand pressure
line. Otherwise, system can be
contaminated.
NOTE
To operate hydraulic test stand, refer
to applicable manual.
1.
Working from ramp, disconnect PWR STRG RTN
tube (1) from port (2) of return control module (3).
2.
Connect test stand return hose (4) to tube (1).
3.
Disconnect return tube (5) from pressure reducer
(6).
4.
Install plug (7) in tube (5).
5.
Disconnect PWR STRG RTN tube (8) from
power steering module (9).
6.
Install plug (10) in tube (8).
7-1183
