TM 55-1520-240-23-6
7-279
ASSEMBLE CARGO DOOR SEQUENCE VALVE (AVIM)
(Continued)
7-279
2.
Clamp body (3) in vise (4). Install two packings
(5) in sleeve (6).
Do not interchange selector set parts
with parts from other sets. Keep
spool and sleeve together as matched
selector set.
Handle selector set carefully to
prevent damage to mating surfaces.
3.
Install spool (7) in sleeve (6).
4.
Install sleeve (6) with spool (7) in body (3).
5.
Install guide (8) and spring (9) in body (3).
6.
Install cap (10) and four screws (11). Lockwire
screws. Use lockwire (E231).
7.
Install sleeve (12) and spring (13) on stem (14).
8.
Push down on sleeve (12) and install pin (15)
in stem (14).
9.
Install stem (14) in cap (10).
10.
Align groove in sleeve (12) with hole in cap (10)
and install pin (16).
11.
Install knob (17) and screw (18) in cap (10).
7-1037