TM 55-1520-240-23-6
7-14
PREPARE FLIGHT CONTROL HYDRAULIC SYSTEM AFTER FLUSHING (RETURN
LINES)
(Continued)
7-14
NO. 1 PUMP
1.
Remove test stand return line (1) and union (2)
from No. 1 pump suction line (3). Use gloves
(E186).
2.
Remove cap from suction port (4) of No. 1 pump
(5).
3.
Connect line (3) to suction port (4).
INSPECT
FORWARD SERVOCYLINDERS
NOTE
Procedure is same at both pivoting
and swiveling servocylinders. Pivoting
servocylinder shown here.
4.
Remove plugs from return hoses (6 and 7) at
both forward servocylinders (8).
5.
Remove four caps from tee fittings (9 and 10) on
both servocylinders (8).
6.
Connect return hoses (6) to tees (9) and return
hoses (7) to tees (10) on both servocylinders (8).
INSPECT
7-87
