TM 55-1520-240-23-5
6-21
REMOVE AFT DRIVE SHAFTING
(Continued)
6-21
REMOVE NO. 8 SHAFT WITHOUT 48
Do not allow bolts to turn while
removing nuts. If bolts turn, damage
to bolts and plates can result.
NOTE
Helper reaches bolts from top of
helicopter.
4.
Remove three nuts (11) and washers (12)
from three bolts (13) that secure No. 8 shaft
(14) to adapter assembly (15) aft of combining
transmission (16). During removal, have helper
hold head of bolts with wrench. Do not remove
bolts at this time.
REMOVE NO. 8 SHAFT WITH 48
4.1.
Remove eight bolts (11.1) and washers (12.1)
from baffle (13.1). Remove baffle.
5.
Have helper support shaft (17). Remove nut (18)
and washer (19) from bolt (20). Work through
bracket (21) at each side of shaft.
NOTE
Rotate shaft as needed to align hole
with bolts.
6.
Remove two bolts (20) and washers (22) through
one of three holes (23).
6-65
