TM 55-1520-240-23-5
6-17
INSTALL NO. 1 DRIVE SHAFT
(Continued)
6-17
3.
With aid of helper, position shaft (1) in structure
(10) against forward transmission adapter (11).
Install two mount bushings (6) in brackets (12).
4.
Coat thread of three bolts (13) with oil (E254).
Install bolts, head forward, special washers (14),
washers (15), and nuts (16) at forward end of
shaft (1).
Do not allow bolts to turn when
torquing nuts. If bolts turn, bolts and
plates can be damaged.
NOTE
If nuts do not meet friction torque,
they must be replaced.
5.
Hold head of bolts (13) with wrench. Check
nuts (16) for friction torque of at least 24
inch-pounds.
6.
Torque nuts to 1000 to 1100 inch-pounds.
6-52