TM 55-1520-240-23-5
6-192
INSTALL COMBINING TRANSMISSION SUMP
(Continued)
6-192
14.
Install 23 bolts (28), washers (29), and nuts (30)
around sump cover (18). Install clip (31) under
head of bolt where shown. Torque nuts to 60
inch-pounds.
15.
Connect drainline (32) to hose nipple (33).
Tighten clamp (34).
16.
Connect straight end of oil hose (35) to union
(36).
17.
Connect breather hose (37) to reducer (38) on
each side of sump cover (18).
18.
Connect electrical connector (39) to oil pressure
switch (40).
INSPECT
FOLLOW-ON MAINTENANCE:
Install combining transmission oil cooler (Task 6-188).
Install oil cooler fan and shaft (Task 6-186).
Service combining transmission sump (Task 1-54).
Close aft pylon doors (Task 2-2).
Perform ground run (TM 55-1520-240-10).
END OF TASK
6-637
