TM 55-1520-240-23-5
6-191
ASSEMBLE COMBINING TRANSMISSION SUMP
(Continued)
6-191
11.
Install two vents (19) and packings (20). Torque
vents to 80 inch-pounds. Lockwire vents to
sump cover (21). Use lockwire (E231).
12.
Install oil filler (22) and packing (23) on sump
cover (21). Install five washers (24) and nuts
(25). Torque nuts to 60 inch-pounds.
13.
Coat packing (26) and thread of inlet screen (27)
with oil (E254). Install inlet screen and packing
in sump cover cavity (28). Torque screen to 80
inch-pounds. Lockwire screen to sump cover
(21) with lockwire (E231).
14.
Coat packing (29) and thread of union (30) with
oil (E254). Install union and packing in cover
(21). Torque union to 80 inch-pounds.
15.
Coat packing (31) and thread of oil pressure
switch (32) with oil (E254). Install switch and
packing in cover (21). Torque switch to 80
inch-pounds. Lockwire switch to cover with
lockwire (E231).
16.
Install packing (33) and hose nipple (34).
17.
Coat two packings (35) and thread of two
reducers (36) with oil (E254). Install reducers
and packings on each side of sump cover (21).
Torque reducers to 80 inch-pounds.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-633
