TM 55-1520-240-23-5
6-179
INSTALL COMBINING TRANSMISSION CHIP DETECTOR
6-179
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Materials:
Lockwire (E231)
Oil (E254)
Parts:
Packing
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
Oil (E254) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes for at least 15 minutes.
Get medical attention for eyes.
1.
Coat packing (1) and thread of chip detector (2)
with oil (E254). Install packing on chip detector.
2.
Install chip detector (2) in transmission port (3).
Torque chip detector to 80 inch-pounds.
6-586