TM 55-1520-240-23-5
6-177
REMOVE COMBINING TRANSMISSION CHIP DETECTOR
6-177
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
Cloths (E120)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Aft Pylon Doors Open (Task 2-2)
Aft Pylon Lower Fairing Open (Task 2-2)
1.
Disconnect electrical connector (1) from chip
detector (2). Remove lockwire.
2.
Position cloths under chip detector (2) to absorb
oil spillage.
NOTE
When detector is removed, oil will
drain from port. Plug port quickly to
prevent oil drainage.
3.
Remove chip detector (2). Quickly plug port (3)
to stop oil drainage.
4.
Remove packing (4) from chip detector (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-583