TM 55-1520-240-23-5
6-104
REMOVE ENGINE TRANSMISSION FROM STORAGE
(Continued)
6-104
3.
Remove barrier material from splines (11 and
12) and electrical connector (13).
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Touching splines with bare fingers can
cause corrosion.
4.
Remove corrosion-preventive compound from
splines (11 and 12). Use cloth (E120) damp with
solvent (E162). Wear gloves (E186) and goggles.
INSPECT
FOLLOW-ON MAINTENANCE:
Assemble (build up) transmission (Task 6-105 or
6-106).
END OF TASK
6-417
