TM 55-1520-240-23-5
6-103
PREPARE ENGINE TRANSMISSION FOR SHIPMENT OR STORAGE
(Continued)
6-103
NOTE
Transmission is supported in container
by molded cushioning. No mounting
bolts are needed.
e.
Install cushioning material (9) over
transmission (4) in container (T38) (5).
f.
Install cover (10) and ring (11). Secure with
bolt (12) and nut (13).
g.
Go to Follow-On Maintenance.
NOTE
Bag is only for short-term storage.
install transmission in shipping
container (T38) as soon as possible.
7.
If shipping container (T38) is not available, make
storage bag (14). Use barrier material (E81) and
tape (E388). Make bag about 40 inches high
and 60 inches around.
8.
Install sling (T3) (6) on lugs (7). Connect hoist
(8) to sling.
NOTE
Have helper guide transmission into
bag.
9.
Lift transmission (4) into bag (14). Remove sling
(6).
10.
Put nine 16-unit bags of desiccant (E160) (14).
Seal bag with tape (E388).
11.
Store transmission (4) indoors, if possible. If
stored outdoors, keep transmission off ground.
Cover with tarpaulin (E410) or plastic sheet
(E279).
6-413
