TM 55-1520-240-23-5
6-99
INSTALL ENGINE TRANSMISSION OUTPUT SHAFT OIL SEAL
(Continued)
6-99
7.
Install clip (8) on stud (9). On left transmission,
install clip at 11 oclock position. On right
transmission, install clip at 5 oclock position.
8.
Install five washers (10) on studs (9) that have
no clip (8).
9.
Install six nuts (11). Check that clips (8) point
away from center of shaft (5). Torque nuts to 60
inch-pounds.
10.
Install hose clamp (12) on clip (8). Install screw
(13), washer (14), and nut (15).
INSPECT
FOLLOW-ON MAINTENANCE:
Install engine transmission adapter assembly and
engine drive shaft (Task 6-32).
Close pylon lower fairing (Task 2-2).
Close pylon hinged fairing (Task 2-2).
Install engine transmission fairing (Task 4-73).
Install engine air inlet screen (Task 4-76).
END OF TASK
6-381