TM 55-1520-240-23-5
6-46
REMOVE FORWARD TRANSMISSION PACKAGE
(Continued)
6-46
22.5.
Loosen aft bolt (51.1) as follows:
a.
Install socket adapter (T93) (52.7) on aft bolt
(51.1).
b.
Install torque applicator (50) with large hole
over drive of socket adapter (52.7). Observe
THIS SIDE UP stamping on applicator.
c.
Install left end of applicator (50) in end block
of reactor (51). Install socket at end of reactor
on right bolt (52.5).
d.
Install pin (51.2) through end block of reactor
(51) and applicator (50).
e.
Install torque applicator pack (T2) (52.8) on
drive of socket adapter (T93) (52.7). Rotate
pack so that two pins on bottom fit into holes
(52.9) in applicator (50). Use socket wrench
speed handle.
f.
Install speed handle on torque pack (T2)
(52.8). Turn handle counterclockwise until
torque is broken.
g.
Turn speed handle clockwise until torque
indicator (52.10) reads 0 and torque pack is
loose.
h.
Remove torque pack (52.8) and torque
reactor assembly (T159).
i.
Do not remove aft bolt (51.1).
6-159
