TM 55-1520-240-23-5
6-46
REMOVE FORWARD TRANSMISSION PACKAGE
(Continued)
6-46
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
19.
Check thread of hoisting eye (T32) (45) and shaft
(46). Threads shall be clean and undamaged. If
needed, clean with dry cleaning solvent (E162)
and cloths (E120). Wear gloves (E186).
NOTE
Hoisting eye (T32) must trail aft to
keep transmission at proper angle
during hoisting.
20.
Install hoisting eye (T32) (45) on shaft (46) so
that FWD XMSN hole (47) trails aft.
21.
Connect work hoist hook (48) to FWD XMSN
hole (47) of hoisting eye (T32) (45). Raise hoist
to take up slack in chain. Do not apply tension.
REMOVE BOLTS
NOTE
Socket assembly, torque applicator
and reactor are part of torque reactor
assembly (T159).
Whenever one or more forward
transmission mounting bolts are
removed, all four bolts must be
removed and reinstalled (Task 6-51).
6-153
