TM 55-1520-240-23-4
5-126.1.1 REPLACE SWASHPLATE LOWER SEAL (AVIM)
(Continued)
5-126.1.1
2.
Carefully lift rotating ring assembly (4) from
stationary ring (3). Use a mallet to separate the
rings, if needed.
3.
Remove nuts (5), washers (6 and 7), and bolts
(8). Remove lower seal retainer (9) from rotating
ring (4).
Do not insert a screwdriver or other
sharp tool between the seal and the
retainer. Serious damage to the seal
seating surface can result.
4.
Remove seal (11) from lower seal retainer (9).
Use a mallet and phenolic drift.
5-703