TM 55-1520-240-23-4
5-126.1
REPLACE SWASHPLATE LOWER SEAL (AVIM)
(Continued)
5-126.1
2.
Carefully lift rotating ring assembly (4) from
stationary ring (3). Use a mallet to separate the
rings, if needed.
3.
Remove nuts (5), washers (6 and 7), and bolts
(8). Remove lower seal retainer (9) and rotating
grease seal (10) from rotating ring (4).
Do not insert a screwdriver or other
sharp tool between the seal and the
retainer. Serious damage to the seal
seating surface can result.
4.
Remove seal (11) from lower seal retainer (9).
Use a mallet and phenolic drift.
5-699
