TM 55-1520-240-23-4
5-110
ASSEMBLE LOWER DRIVE ARM
(Continued)
5-110
6.
Wait until bearing (3) warms to room temperature.
7.
Apply epoxy primer (E292) to faying surfaces of
two retainer plates (4). Wear gloves (E184.1).
NOTE
Holes in plates and arm may be
enlarged for 5/32 inch oversized
rivets.
8.
Position two plates (4) on lower arm (3).
9.
Apply epoxy primer (E292) to two rivets (5).
Install two rivets in two plates and arm, while
rivets are wet. Wear gloves (E184.1).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-630