TM 55-1520-240-23-4
5-98
REPAIR PITCH LINK
(Continued)
5-98
d.
Check bearing (1). Outside diameter shall be
1.7495 to 1.7500 inches. Check rod-end
bore (12). Diameter shall be 1.7482 to
1.7487 inches.
Do not stake bearing. Staking marks
cause failure of rod-end. This results
in injury to personnel and damage to
equipment.
Do not press bearing on any surface
but outer race. Bearing damage will
result.
4.
Press replacement bearing (1) into rod-end (10
or 11). Install outer race (13) flush with, or below,
face of rod-end. Use arbor press and adapter
(TM 55-1500-322-24).
INSPECT
5-594