TM 55-1520-240-23-4
5-22
REMOVE PITCH-VARYING HOUSING (Continued)
5-22
NOTE
Worn bearing cage, which permits
rollers to be loose or to fall out, is not
cause for replacement.
10.
If bearing rollers (19) fall from cage (20), clean
and place rollers back in cage. Apply thin coat of
grease (E190) over rollers to hold them in cage.
11.
Cover pitch shaft (18). Use barrier material (E80)
and tape (E388).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-113
