TM 55-1520-240-23-3
3-27
REMOVE AFT LANDING GEAR
(Continued)
3-27
NOTE
To remove bolt, it maybe necessary to
jack aircraft higher.
12.
Remove nut (35), washer (36), and bolt (37) from
lower drag link trunnion pin (38).
13.
If a right gear is being removed, remove two nuts
(39), screws (40), and clamps (41).
14.
Remove cotter pin (42), nut (43), and washer
(44) from trunnion pin (38).
15.
Drive trunnion pin (38) outboard while helper
supports lower drag link (45). Use slide hammer.
16.
Remove lower drag link (45) from fuselage attach
point.
17.
Remove blocks and roll landing gear away from
helicopter with aid of helper.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
3-70
