TM 55-1520-240-23-3
3-27
REMOVE AFT LANDING GEAR
(Continued)
3-27
6.
Remove lockwire from clamps (16).
7.
Remove clamps (16), support blocks (17), and
hydraulic hoses and tubing (18, 19, and 20) from
drag link (8).
8.
Disconnect brake hydraulic hose (21) from elbow
at top of landing gear (22).
9.
Remove cotter pin (23), nut (24), two washers
(25), bolt (26), and bushing (27) from top of
shock strut (28) at fuselage attach point.
10.
Have helper chock and support gear so it will not
move when components are removed.
11.
Remove cotter pin (29), nut (30), washers (31),
bushing (32), and bolt (33) from upper drag link
(8) at fuselage attach point (34).
3-69
