TM 55-1520-240-23-3
4-33
REPLACE BUSHINGS IN FORWARD ENGINE MOUNT LUGS (AVIM)
(Continued)
4-33
8.
Coat inside of hole (5) in lug (2) with epoxy
primer (E292). Wear gloves (E184.1).
NOTE
Bushing must be installed while epoxy
primer (E292) is still wet.
9.
Install new bushing (1) in lug (2) so shoulder (16)
of bushing is facing outboard.
10.
Wipe off excess primer from lug (2). Use cloths
(E135).
REPLACE SHOULDERLESS BUSHING
NOTE
It may be necessary to apply carbon
dioxide (E92) to bushing area for
easier removal of bushing.
11.
Remove bushing (17) from engine mount lugs
(4) and (18).
12.
Ream lug (4) in line with other lug (2). Make a
round hole (19) with an inside diameter (20) no
larger than 0.9844 inch.
4-175
