TM 55-1520-240-23-3
4-34
INSTALL FORWARD ENGINE MOUNT CAP ASSEMBLY
(Continued)
4-34
8.
Remove spare nut (9) from bolt (10).
NOTE
When installing latch bracket, make
sure washers are kept in order.
Placement of washers affects
adjustment of engine covering.
9.
Position latch bracket (11), bolt (10), and six
washers (12) together as one piece against bolt
(5). Install bolt (10), washers (12), and latch
bracket (11) into head of bolt (5).
10.
Lockwire bolt (10). Use lockwire (E231).
INSTALL OUTBOARD MOUNT
11.
Install bearing (13) and cap (14).
12.
Install bolt (15), bolt head outboard.
13.
Install washer (16), lockwasher (17), and nut (18)
on bolt (15).
14.
Torque nut (18) on outboard mount to 350
inch-pounds. Make sure bearing (13) turns
freely.
15.
Bend tab on lockwasher (17) flat over nut (18).
4-179
