TM 55-1520-240-23-3
4-10
REMOVE POWERPLANT
(Continued)
4-10
6.
Tag and disconnect three hoses (15) at
transmission (16). Drain oil into container. Wipe
up any spilled oil. Use cloths (E135).
7.
Disconnect cable plug (17).
8.
Remove lockwire from two bolts (18) on two
forward engine mount caps (19). Loosen bolts
and push down.
9.
Install sling (20) as follows:
a.
Open access door (21) in engine access
cover (22).
b.
Connect two cables (23) to forward fittings
(24) on powerplant (1).
c.
Connect cable (25) into aft fitting (26) through
cover (22).
d.
Adjust sling (20) until eye (27) is over center
hole (28) in sling bar (29).
e.
Install pin (30) through bar (29).
4-48
