TM 55-1520-240-23-3
4-10
REMOVE POWERPLANT
(Continued)
4-10
3.
Tag and disconnect seven hoses (5) and two
cable connectors (6) from shelf (7).
4.
Remove two screws (8) and nut (9). Remove
two clamps (11). Mark clamp locations. Use
tape (E388).
5.
Remove lockwire and disconnect cable plug (12)
from oil pressure transmitter (13). Disconnect
oil hose (14).
Fuel boost pump inlet fitting must be
loosened before engine removal.
4-47