TM 55-1520-240-23-10
16-50
INSTALL FLARE DISPENSER ASSEMBLY
16-50
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Torque Wrench, 5 to 50 Inch-Pounds
Materials:
None
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
Make sure battery is disconnected,
electrical power off, arm safe switch
is set to safe, ripple fire switch is set
to down (guarded), and remote test
switch is set to normal. Otherwise,
damage, personal injury, or death can
occur.
1.
From outside helicopter, remove two screws (1)
from cover (2). Remove cover.
16-232