TM 55-1520-240-23-10
16-50
INSTALL FLARE DISPENSER ASSEMBLY
(Continued)
16-50
2.
Feed electrical plug (3) through seal (4).
3.
Position dispenser (5) over seal (4). Install four
screws (6).
4.
Torque four screws (6) to 40 inch-pounds.
5.
From inside helicopter, stow cover (2) by
positioning on structure (7). Install two screws
(1).
6.
Connect electrical plug (3) to receptacle (8).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
Close cargo ramp (TM 55-1520-240-T).
Install acoustic blanket at right side, sta 555 (Task
2-210).
END OF TASK
16-233
