TM 55-1520-240-23-10
12-16
REMOVE FIRE EXTINGUISHER SYSTEM SWITCH AND ACTUATOR ADAPTER
12-16
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Materials:
None
Personnel Required:
Aircraft Electrician
Equipment Condition:
Off Helicopter Task
Fire Pull Control Removed (Task 12-15)
1.
Remove two nuts (1), washers (2), and screws
(3).
2.
Remove two plates (4), four adapters (5), and
four switches (6) from control body (7).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
12-47