TM 55-1520-240-23-10
16-35
INSTALL FORWARD OR AFT CARGO HOOK INTERNAL MANUAL RELEASE
CABLE
(Continued)
16-35
13.
Install locknut (14) and clevis (15) on cable (1).
14.
Align holes in clevis (15) and manual release
bellcrank (16). Install pin (17), washer (18), and
cotter pin (19).
15.
Have helper, working at forward hook, remove
lockwire from inspection window retaining bolts
(20 and 21).
16.
Loosen bolts (20 and 21). Swing inspection
window (22) down.
17.
Make sure clearance is 0.00 to 0.20 inch
between ball end (23) and surface ‘X’ of release
arm (24).
17.1.
If gap is not within limits, adjust forward or aft
cargo hook manual release cable (Task 6-35.1).
16-189
