TM 55-1520-240-23-10
16-5
DISASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-5
29.
Remove formers (61 and 62) from actuating
cylinder support (56). Use plastic or fiber mallet.
30.
Remove pin (100) from former (61). Remove
shaft (101) and bearings (102 and 103) from
former (62).
31.
Remove bearings (102 and 103) from shaft (101)
(TM 55-1500-322-24).
32.
Remove six bolts (104), two cam plates (105)
and two cams (106 and 107) from formers (61
and 62).
33.
Remove two cotter pins (108), cam bearings pins
(109) and cam roller bearing (110) from cams
(106 and 107).
34.
Remove four bolts (111), four washers (112), and
two cam stops (113) from formers (61 and 62).
35.
Remove bolts (114), washers (115), and two cam
stops (116) from formers (61 and 62).
36.
Remove two bolts (117), washers (118), and
bracket (93) from former (61).
16-40