TM 55-1520-240-23-10
16-5
DISASSEMBLE CENTER CARGO HOOK (AVIM)
(Continued)
16-5
12.
Remove bolt (41) and washer (42).
13.
Remove bolt (43), washer (44), and bracket (45).
Remove guard (25).
14.
Remove six screws (46) and washers (47) from
cover (48). Remove screw (49), washer (47),
plate (50), and strap (40) from cover. Remove
cover.
15.
Remove hose (51) from actuating cylinder (52).
16.
Remove nut (53), washer (54), and bolt (55) from
actuating cylinder support (56).
17.
Remove three nuts (57), washers (58), and bolts
(59) from block (60). Remove block from formers
(61 and 62).
NOTE
Do not remove bearings unless they
are worn.
17.1.
Remove two bearings (62.1) (TM
55-1500-322-24).
18.
Remove two springs (63) from eyebolts (64) and
levers (8 and 65).
19.
Remove two nuts (66), washers (67), and eye
bolts (64) from formers (61 and 62).
20.
Remove two nuts (68), washers (69), levers (8
and 65), and cams (70 and 71) from shaft (72).
21.
Remove two bolts (73) and bushings (74).
16-38
