TM 55-1520-240-23-10
14-18
INSPECT HOIST OPERATOR’S HARNESS
14-18
INITIAL SETUP
Applicable Configurations:
All
Tools:
None
Materials:
None
Personnel Required:
Inspector
References:
TM 1-1500-204-23
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Heater Compartment Acoustic Blanket Removed
(Task 2-208)
1.
Check harness (1) for cuts or fraying (TM
1-1500-204-23).
2.
Check fittings (2) for corrosion and proper
operation (TM 1-1500-204-23).
3.
Check lockring (3) for corrosion (TM
1-1500-204-23).
4.
Check webbing for deterioration (TM
1-1500-204-23).
5.
Stow operator’s harness (1) in bottom pocket (4)
of stowage container (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
14-54
