TM 55-1520-240-23-10
14-16
CLEAN AND INSPECT CABLE CUTTER
(Continued)
14-16
3.
If cable cutter (3) has been fired without cable
in place, log report of firing. Fill out inspection
record and record serial number of cable cutter.
4.
Check cable cutter (3) for corrosion, cracks, or
nicks.
5.
Coat all parts lightly with oil (E250) using cloths
(E135).
Use care when handling cartridges.
Injury to personnel could result if
cartridge fires.
6.
Dispose of unserviceable live cartridges. Place
them in empty can that contained replacement
cartridge. Tag can unserviceable. On the tag
write the reason for cartridge removal, date of
removal, and date of installation. Return the
cartridge to the Ammunition Supply Activity.
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
14-50
