TM 55-1520-240-23-10
14-14
INSTALL HOOK AND CABLE ASSEMBLY
14-14
INITIAL SETUP
Applicable Configurations:
All
Tools:
None
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
Quick-disconnect cable guard must be
installed during all rescue and cargo
operations. Otherwise hook assembly
can be accidently disconnected from
coupling. This can result in death or
serious injury to personnel.
1.
Remove upper half of quick-disconnect cable
guard (1) from lower half of cable guard (2).
2.
Install cable (3), through lower half of cable
guard (2).
3.
Push up and hold lower end of spring-loaded
coupling (4).
4.
Install ball end (5) of cable (3) into coupling (4).
5.
Release lower end of coupling (4).
6.
Connect guard (2) to upper half of cable guard
(1).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
14-46
