TM 55-1520-240-23-10
14-11
INSTALL WINCH WIRE ROPE (CABLE)
(Continued)
14-11
10.
Position four washers (19), two rollers (20), and
bracket (21) on posts (17).
11.
Install two screws (22) in bottom of posts (17).
Lockwire screws with lockwire (E229).
INSPECT
12.
Remove wooden block (23).
13.
Position winch (24) so back of winch faces
inboard. Make sure guard (25) is aligned with
wire rope (1) in back of winch.
14.
Install four bolts (26) and washers (27) on winch
(24).
15.
Remove caps and connect four hydraulic lines
(28). Use container and cloths (E120) for spilled
fluid.
16.
Connect electrical plug (29).
14-41
