TM 55-1520-240-23-10
13-47
INSTALL CABIN TEMPERATURE SELECTOR
(Continued)
13-47
4.
Position metal panel (2) in cockpit overhead
panel (7). Tighten four fasteners (8).
5.
Align holes in plastic panel (9) and metal panel
(2). Install two screws (10).
6.
Install four panel lights (11) and seals (12) in
plastic panel (9).
7.
Remove tags and install two press-to-test lights
(13) in plastic panel (9).
8.
Install two knobs (14) on selectors (1 and 15).
9.
Tighten setscrews (16).
FOLLOW-ON MAINTENANCE:
Perform operational check of heating system (TM
55-1520-240-T).
END OF TASK
13-149