• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  YAW,  THRUST, ROLL OR  PITCH ILCA INTERMEDIATE  CONNECTING LINKS
REPAIR  YAW, THRUST,  ROLL, OR PITCH ILCA INTERMEDIATE  CONNECTING  LINKS (AVIM) (Continued) - TM-55-1520-240-23-9_725

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  697    698    699    700    701  702  703    704    705    706    707  
TM  55-1520-240-23-9 11-178.1 REPAIR  YAW,  THRUST, ROLL,  OR PITCH ILCA INTERMEDIATE  CONNECTING  LINKS (AVIM) 11-178.1 INITIAL  SETUP Applicable  Configurations: All Tools: Machine  Shop  Set, NSN 4920-00-405-9279 Arbor  Press Roller  Staking  Kit  (T169) Materials: Crocus  Cloth  (E122) Epoxy Primer  (E292) Epoxy Primer  (E292.1) Gloves  (E184.1) Kevlar  Gloves  (E187) Acetone  (E20) Carbon  Dioxide  (Dry  Ice) (E92) Methanol  (E243) Cloth  (E120) Parts: Bearings Sleeve Personnel  Required: Machinist Inspector References: TM  1-1520-253-23 TM  55-1500-322-24 TM  55-1520-240-23P MIL-I-6866 Task  11-8 Equipment  Condition: Off  Helicopter  Task General  Safety Instructions: Acetone  (E20) is extremely flammable. It can  be  toxic.   Avoid  inhaling.   Use only with  adequate  ventilation.  Avoid contact  with  skin,  eyes,  or  clothing. Keep  away from  heat,  sparks,  or open flame.  In  case  of contact,  immediately flush  skin  or  eyes  with  water  for at  least  15  minutes.   Get  medical attention  for eyes. Carbon  dioxide  (dry  ice)  (E92)  is toxic.   It  can  irritate  skin  and  causes burns.   Avoid  inhaling.  Use  only with adequate  ventilation.   Avoid  contact with  skin,  eyes,  or clothing.   In  case of  contact,  immediately  flush  skin or  eyes  with  water  for at  least  15 minutes.   Get medical  attention  for eyes. Methanol  (E243) is  flammable  and toxic.   Use  only  with  adequate ventilation.  Keep  away from  heat and open  flame.   Do  not  inhale.   Do  not contact  eyes,  skin,  or  clothing.   In case  of  contact,  immediately  flush skin  or  eyes  with  water for  at  least 15  minutes.   Get medical  attention for eyes. Carbon  dioxide  (dry  ice)  (E92)  in methanol  (E243)  has  temperature  of -120ºF  (-84ºC).  Observe  all  safety measures  when  working  with  dry ice  (E92)  and  methanol  (E243), and when  handling  chilled  parts.   Avoid breathing  carbon  dioxide  vapor. Wear protective  Kevlar gloves (E187) when  handling  chilled  bearings. Epoxy  primer  (E292  or  E292.1)  is flammable  and  toxic.   It can  irritate skin  and  cause  burns.   Use  only  with adequate  ventilation,  away  from  heat or open  flame.  Avoid contact with  skin, eyes,  or  clothing.  In  case  of contact, immediately  flush  skin  or eyes  with water  for  at  least 15 minutes.   Get medical  attention  for eyes. 11-708







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.