REPAIR YAW, THRUST, ROLL, OR PITCH ILCA INTERMEDIATE CONNECTING LINKS
Remove sleeve (4) from link (1). Counter bore
the sleeve to a diameter of 1.085" to 1.090" to a
depth of 0.290" to 0.300". The counter bore to
be made from the same side that the roller stake
was and the bearing was pressed. Failure to
counter bore the lip sleeve may result in damage
to the link. Support the link in an arbor press
(TM 55-1500-322-24). Using a drift of 1.080"
diameter press out the remainder of the sleeve.
See figure for drift dimensions.