TM 55-1520-240-23-9
11-137
ADJUST PITCH OR ROLL BALANCE SPRINGS
(Continued)
11-137
Hydraulic power must be removed
before adjusting spring; otherwise,
injury to personnel can occur.
5.
Remove hydraulic power.
6.
Working in closet, move strap (7) up one hole if
movement is aft and down one hole if movement
is forward.
7.
Apply hydraulic power.
8.
Repeat steps 1 thru 4.
Hydraulic power must be removed
before adjusting spring; otherwise,
injury to personnel can occur.
9.
Remove hydraulic power.
10.
Working in closet, move strap (9) up one hole if
movement is left, and down one hole if movement
is right.
11.
Apply hydraulic power.
12.
Repeat steps 1 thru 4.
11-600
