TM 55-1520-240-23-9
11-90
REMOVE CONTROL PALLET STA 120
(Continued)
11-90
5.
Tag roll input link (9). Remove cotter pin (10), nut
(11), and washer (12) from bolt (13). Slide bolt
outboard to release link from roll idler bellcrank
(14). Disconnect link.
6.
Install bolt (13), washer (12), and nut (11) loosely
in bellcrank (14).
7.
Tag pitch input link (15). Remove cotter pin (16),
nut (17), and washer (18) from bolt (19). Slide
bolt outboard to release link from pitch idler
bellcrank (20). Disconnect link.
8.
Install bolt (19), washer (18), and nut (17) loosely
in bellcrank (20).
9.
Pull edge of blanket (21) away from bulkhead
(22).
10.
Have helper support control pallet (23). Working
in cabin, remove six bolts (24) and washers (25)
from pallet and bulkhead (22). Remove pallet.
FOLLOW-ON MAINTENANCE:
Repair control pallet (Task 11-90.1).
END OF TASK
11-482