TM 55-1520-240-23-9
11-88.1
INSPECT INSERTS IN CONTROL PALLET STA 95 AND STA 120
11-88.1
INITIAL SETUP
Applicable Configurations:
All
Tools:
None
Materials:
None
Personnel Required:
Aircraft Structure Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Servocylinder Safety Blocks (T31) Installed (Task
11-28)
Closet Acoustic Blanket Removed (Task 2-107)
Closet Backup Panel Removed (Task 2-2)
Thrust and Yaw Connecting Links Removed (Task
11-105)
NOTE
It is not necessary to remove any
components from pallet.
1.
Examine pallet for defective inserts or inserts
displaced from their normal position.
2.
Apply hand pressure to pallet mounted
components. Check for looseness between
components and the pallet. Any gap between
component mounting lugs and pallet inserts
indicates loose inserts.
3.
Visually inspect for a round plug of white
adhesive in a gap to identify loose inserts.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-478