• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REPLACE  INSERTS  IN CONTROL PALLET STA  95 AND STA 120 (AVIM) (Continued) PREPARE  INSERT
REPLACE  INSERTS  IN CONTROL PALLET STA  95 AND STA 120 (AVIM) (Continued)

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  475    476    477    478    479  480  481    482    483    484    485  
TM  55-1520-240-23-9 11-90.1 REPLACE INSERTS  IN  CONTROL PALLET STA  95 AND  STA 120 (AVIM) (Continued) 11-90.1 MIX  ADHESIVE 10. Mix  adhesive  (E40  or  E41)  as  follows: Adhesives  (E40  and  E41)   are toxic.   It  can  irritate  skin  and  cause burns.  Avoid  inhaling.  Use  only  with adequate  ventilation.   Avoid  contact with  skin,  eyes,  or  clothing.   In  case of  contact,  immediately  flush  skin or  eyes  with  water  for  at  least  15 minutes.   Get  medical  attention  for eyes. NOTE Adhesive  (E40)  is  preferred.   Use adhesive  (E41)  only  if  adhesive  (E40) is  not  available. a. Mix  a  tube  of  prepackaged  adhesive  (E40). Follow  instructions  on  kit.   Wear  gloves (E186). b. If  prepackaged  adhesive  (E40)  is  not available,  prepare  adhesive  (E41).   Mix  100 parts of  resin  and  23  parts of  hardener  by weight.   Use  trip  balance  and  polyethylene cup  (E157).   Stir  until  color  is  uniform.   Use wood  spatula  (E424). NOTE Working  life  of  adhesive  is  about  30 minutes. INSTALL  INSERT 11. Inject  adhesive  mixture  through  either  hole  (11) in  tab  (8).  Use  hypodermic  injector.  Continue  to inject  mixture  until  it  flows  from  the  other  hole. 12. Wipe  off  excess  adhesive  from  top  of  tab  (8). Use  cloths  (E120). 11-486







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.